Stationary Systems

Cold Water Stationery SystemsStandard Equipment

  • Belt-driven General ceramic plunger pump with adjustable pressure regulator, pilot-activated flow switch and thermal protection shutdown
  • NEMA 12 control box with NEMA 4X "MANUAL/OFF/AUTO" selector switch, motor starter/overload relay, control circuit transformer (primary to 24 VAC)
  • Powder coat painted heavy-gauge carbon steel base with pump cover and rubber isolation mounts
  • Powder coat painted heater wraps and pump covers
  • Dual or single lance/gun(s) with 50 ft. high-pressure wash hose(s) and low-pressure (downstream) or high-pressure (upstream) chemical injection
  • ALL EA-SERIES MODELS FEATURE TRIGGER GUN ACTIVATED AUTO START/STOP CONTROL SYSTEM WITH SOLID-STATE TIME DELAY SHUTDOWN
S950ES - 9 gpm at 5000 psig 
with optional Cat plunger pump and structural steel mounting base
S950ES - 9 gpm at 5000 psig with optional Cat plunger pump and structural steel mounting base
S420EAS - 4 gpm at 1900 psig
with optional Cat piston pump
S420EAS - 4 gpm at 1900 psig with optional Cat piston pump
S210EA - 2.1 gpm at 1000 psig
S210EA - 2.1 gpm at 1000 psig

 

Brochure

 

Models

MODEL PERFORMANCE/DESIGN DATA for 60hz (Avail from 2gpm-200gpm/ 750psi-7000psi, 230v-575v/ 50hz or 60hz)

MODEL NO. FLOW GPM PRESSURE PSIG MOTOR H.P. VOLTAGE
~1 PHASE
VOLTAGE
~3 PHASE
FULL
LOAD AMPS ~1 PHASE
FULL
LOAD AMPS ~3 PHASE
DIMENSIONS
L" X W" X H"
S210EA 2.1 1000 1.5 110 -- 12.1 --
S315EA 3.0 1500 3 230 -- 17 -- 24/12/14
S411EA 4.0 1100 3 230 208/575/480 17 9.8/3/4.4 30/20/16
S420EA 4.0 1900 5 230 208/575/480 22 14.6/5/6.6 30/20/16
S429EA 4.0 2900 7.5 230 208/575/480 33 22.5/7.5/9.8 30/20/16
S440EA 4.0 4000 10 -- 208/575/480 -- 29/10/12.5 30/20/16
S543EA 5.4 3000 10 -- 208/575/480 -- 29/10/12.5 30/20/16
S562EA 5.6 2000 7.5 230 208/575/480 33 22.5/7.5/9.8 30/20/16
S612EA 6.0 1200 5 230 208/575/480 22 14.6/5/6.6 30/20/16
S620EA 6.0 2000 7.5 230 208/575/480 33 22.5/7.5/9.8 30/20/16
S812EA* 8.0 1200 7.5 230 208/575/480 33 22.5/7.5/9.8 30/20/16
S820EA* 8.0 1900 10 -- 208/575/480 -- 29/10/12.5 30/20/16
S830EA* 8.0 2900 15 -- 208/575/480 -- 40/14.5/18.1 38/28/19
S1030EA* 10.0 2900 20 -- 208/575/480 -- 59.3/25.7/26.0 38/28/19

Common Factory Options

Part # Description
CS1-SSB Chemical injection Station (as above) housed in lockable stainless steel panel box
CS-1 Chemical Injection Station with adjustable chemical injector, wash/rinse control valve and swivel connection
CLS Cleaning Station assembly with high-pressure shutoff valve and hose quick connect
ETM Large-faced Elapsed Time Meter
SA Nitrogen charged pump pulsation surge arrestor
LWPP Low Inlet Water Pressure Protection with illuminated reset button
3ELV-SS #316 Stainless Steel Louvered pump end covers
SRA Surge Relief Assembly (for installation on water supply line when backflow preventer or check valve present)
3SS #316 Stainless Steel pump cover
CUSTOM Custom designed systems up to 200 gpm and up to 7000 psi available
VFOS Variable Fequency Operating System-custom designed variable frequency drive for multi-gun systems